ColdTech CFD-2F 소유자 매뉴얼 - 페이지 5
{카테고리_이름} ColdTech CFD-2F에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ColdTech CFD-2F 12 페이지. Two solid full door freezer
ColdTech CFD-2F에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
Please pay close attention the the safety notices in this section. Disregarding
these notices may lead to serious injury and/or damage to the unit.
KEY
!
ATTENTION
1) To minimize shock and fire hazards, be sure not to overload outlet. Please designate
!
one outlet for your unit.
2) Do not use extension cords.
3) Do not put your hands under the unit when the unit is required to be moved.
4) When the unit is not in use for a long period of time, please unplug the unit from the
outlet.
5) After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure to do
so could cause damage to the compressor.
1) To minimize shock and fire hazards, please do not plug or unplug the cord with wet
hands.
2) During maintenance and cleaning, please unplug the unit.
1) To minimize shock and fire hazards, make sure that the unit is properly grounded.
1) Do not attempt to remove or repair any component unless instructed by factory.
2) Make sure that the unit is not resting on or against the electrical cord and plug.
3) To minimize personal injury, do not hang on the doors.
4) Do not store any flammable and explosive gas or liquids inside the unit.
5) Do not attempt to alter or tamper with the electrical cord.
6) Do not set the desired temperature out of the recommended temperature range:
SAFETY / WARNING
UNPLUG CORD
(Ref: 32 F - 55 F
PROPER GROUNDING REQUIRED
Fre: -15 F - 20 F)
-5-
PROHIBITED