Dadant M00370 매뉴얼

{카테고리_이름} Dadant M00370에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dadant M00370 2 페이지. Cappings tank

Assembly

Operation

Maintenance

Replacement Parts

ASSEMBLY

1. Remove from carton and completely unpack.

2. Turn tank upside down and insert legs, with casters attached, into leg brackets.

3. Turn upright on casters.

4. F or adapting drain to plastic tubing(1-1½ '' tubing) remove the tape from the drain adapter assembly

(No. 5-215) and hand tighten nut on to drain fitting.

5. If cappings baskets(M00371) are to be used, place one pair of the baskets in the tank bottom so that the

basket runners allow honey to flow to the drain. Clip the baskets together with clip(No. 371-03) and slide

the baskets to the end of the tank, away from the drain.

6. If uncapping into baskets, place cross bar (No. 370-03) on top of tank as follows:

-Remove wing nut and washer from one end.

-Opposing washer is placed under tank lip.

-Replace washer and nut removed and position the cross bar for uncapping and tighten wing nuts.

7. Uncap with the end bar resting on the lag screw.

M00370 CAPPINGS TANK

CORPORATE OFFICE

51 S. 2nd Street, Hamilton, IL 62341

Ph. 217-847-3324 Toll Free 1-888-922-1293