Canon EOS-1D 사용 설명서 - 페이지 31
{카테고리_이름} Canon EOS-1D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EOS-1D 41 페이지. For macintosh
Canon EOS-1D에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 소프트웨어 설명서 (2 페이지), 팁과 기술 (35 페이지), Af 포인트 관리 (2 페이지), 소프트웨어 사용 설명서 (50 페이지), 부품 카탈로그 (38 페이지)
페이지 인쇄
Adjusting the White Balance
You can set the white balance with each method.
Selecting the White Balance
You can set the white balance.
Specifying the Color Temperature
You can specify the color temperature in the range of 2800 to 10000K (in 100K increments).
Click White Balance Function
Makes white the standard for the point you selected and color in the image is adjusted.
Click the [Click] button.
1
When you move the cursor over
the image, the cursor [ ] changes
to [
].
Click the point where is to be the standard.
2
The color in the image is adjusted with white as the standard on the point you
selected.
If you click on another point over the image, the white balance is adjusted again.
When you finish this operation, click the [Click] button.
The image is adjusted based on the average value of the range of 5
clicked point.
Even if you have selected a neutral gray point of the image, the result of adjustments is
the same as when you select a white point.
(p.1-7)
(p.1-7)
5 pixels from the
Adjusting with the Color Wheel
You can select a desired color from the color wheel. You can also specify the hue in the range
of 0 to 359 (in 1-stop increments), and the saturation in the range of 0 to 255 (in 1-stop
increments).
Registering Adjusted White Balance
(Personal White Balance)
You can register up to 3 adjusted white balance data as personal white balance settings.
Adjust the white balance.
1
Click the [Register] button.
2
The [Register personal white
balance] dialog box appears.
Select the number of the button to be registered from the list.
3
Click the [OK] button.
4
Personal White Balance
(p.1-8)
You can apply the registered personal white balance to images.
(p.1-8)
2-4
Cover/Table of
Contents
Introduction
Displaying Thumbnail Images
1
and Performing Basic Edits
in the Main Window
2
Performing Detailed
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Displaying an
4
Image in the Quick
Check Window
5
Reference
Index