Canon EOS-1D Mark II Digial 팁과 기술 - 페이지 19

{카테고리_이름} Canon EOS-1D Mark II Digial에 대한 팁과 기술을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EOS-1D Mark II Digial 35 페이지. Firmware update procedures
Canon EOS-1D Mark II Digial에 대해서도 마찬가지입니다: 브로셔 및 사양 (20 페이지), 사용 설명서 (28 페이지), 사용 설명서 (41 페이지), 소프트웨어 설명서 (2 페이지), 소프트웨어 설명서 (2 페이지), 사용 설명서 (19 페이지), 제품 설명서 (39 페이지), 포켓 매뉴얼 (2 페이지), 사용자 설명서 (2 페이지), 사양 (2 페이지), 매뉴얼 북 (29 페이지), 빠른 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 업데이트 매뉴얼 (8 페이지)

페이지 인쇄

the main subject is the closest and most prominent object in the frame and, in

One-Shot, this is where AFPS works best.

The Bonus Feature is that the QCD is now part of your focusing system rather than your

exposure control. The exposure controls are relocated to the AF Point Selection Button.

Hold the selection button in and turn the Main Dial on top of the camera to adjust

exposure compensation in AE modes, or f/stops in Manual mode. The disadvantage of

having these exposure features on the QCD was that it made it very easy to change

exposure settings accidentally. Now, it's just as fast to adjust your exposure settings,

and you are far less likely to change them accidentally.

Action Combo

This combination is most useful for sports and wildlife photographers. Like the Event

Combo, it provides a great deal of versatility and on-the-fly decision-making ability for

photographers, especially for those who shoot rapidly moving subjects in AI Servo AF.

Shooting

Situation

Examples

Sports,

Wildlife,

Birds

Single AF

Point –

Football,

Soccer,

Hockey,

Wildlife

AFPS –

Baseball,

birds in

flight,

wildlife in

the open

I. CAMERA FEATURES AND OPERATION

AF Mode

C.Fn Set

Focus

Activation

button

AI Servo

4-1 or 4-3

Rear Button

AE Lock (*)

focus

activation –

and Assist

Button

17-1

(optional)

18-2

Function

Moves focus activation from the Shutter

release's halfway position (SW-1) to the

camera's rear AE Lock button (*).

C.Fn 4-3 is probably a bit better in rapidly

changing shooting situations like this

because it takes the meter reading in

real-time at the moment of exposure and

can adjust when a subject moves from one

lighting condition to another (e.g., a player

running from shade into the sun). Each

image in a sequence is metered separately.

C.Fn 4-1 will lock the metering for all shots

to the setting used for the first image in the

sequence when using continuous drive. This

is useful if you're shooting a sequence in

even lighting where multiple images may be

printed or shown together.

This expands the AF activation area if

needed in lowered contrast situations.

Activates the Assist Button as a focus

activation button using the photographer

registered HP.