DADO Door Master Controller 운영 매뉴얼 - 페이지 6

{카테고리_이름} DADO Door Master Controller에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DADO Door Master Controller 20 페이지.

MENU SETTINGS:

These are the settings found in the Main Menu.

1. Test Motion

2. Closed Position

3. Max Torque

4. Input Config

5. Closing Trip Level

6. Opening Trip Level

7. Home Trip Level

8. Object Detection Level

9. Open Speed

10. Closing Speed

11. Set < > Directions

12. Accel/Decel Config

13. Offset Open Position

14. Offset Enable

15. Auto Close Enable

16. Auto Close Delay

17. Volume(Audio/Beep)

18. Device ID

19. Ping Dist Set

20. Deadband

21. Temperature Comp*

22. Reset All Settings

* Factory settings. Do not change.

BYPASS MODE:

If required, at power ON the user can immediately PRESS and HOLD down the

Setup Mode Button until the Main Menu appears, this will bypass the

diagnositcs and HOMING process. This BYPASS approach to the Setup Mode is

for special cases where the user may need to make some adjustments prior to

the system running the diagnostics and HOMING routine.

DO NOT ATTEMPT TO

OPERATE THE DOOR FROM THIS MODE USING TEST MOTION, THE DOOR MUST BE

HOMED PRIOR TO MOVING THE DOOR. If using the Bypass Mode, once you exit

the Setup Mode by turning off the RED LED, the system will automatically begin

the diagnostics and homing routine.