Advance acoustic ALL CLEANER XP 사용 지침 및 부품 목록 - 페이지 7

{카테고리_이름} Advance acoustic ALL CLEANER XP에 대한 사용 지침 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Advance acoustic ALL CLEANER XP 13 페이지. Models: 56380772, 56381594

페이지 인쇄

Advance acoustic ALL CLEANER XP 사용 지침 및 부품 목록

MAINTENANCE

Use only approved chemicals at the recommended mix ratios. All chemicals should be added through the feed system and NOT

added directly to the water in the solution tank to prevent possible damage to the pump, seals, or other components.

For optimum performance, ﬂ ush the Chemical Feed lines after every job by replacing the chemical containers with containers of

clear water and spraying through the gun until the ﬂ uid stream is clear. See the Maintenance Schedule, below.

The pump seals and/or valves in the high pressure pumps may need to be replaced after about 1000 hours of use, if the pump

begins to loose performance or to leak. The pressure regulator valve may need to be when a drop in the spraying pressure at the

tool is apparent.

If the 4", clear lid is removed from the top of the base (solution tank), you will need to apply a silicone sealant to the threads when

you reinstall the lid to seal for vacuum leaks.

MAINTENANCE SCHEDULE

ITEM

Flush chemical lines

Check/clean vac inlet ﬁ lter

Clean solution ﬁ lter

Check vacuum motor airways

Check pump for leaks

Check vacuum motor brushes*

* Have Advance check the carbon brushes once a year or after about 500 hours of operation.

TECHNICAL SPECIFICATIONS (as installed and tested on the unit)

MODEL

VACUUM MOTOR:

WATER LIFT:

AIR FLOW:

TANK CONSTRUCTION:

SOLUTION TANK CAPACITY:

RECOVERY TANK CAPACITY:

APPLICATION FLOW:

VAC & SOLUTION HOSE LENGTH:

POWER CORD:

HEIGHT:

WIDTH:

LENGTH:

WEIGHT

revised 10/10

DAILY

WEEKLY

56380772

2 stage, 8 amp

97"

100 CFM

Rotationally molded polyethylene

20 gallon

12 gallon

200 psi

15 feet

25 feet

38.5 inches

21.25 inches

34 inches

85 LBS

QUARTELY

YEARLY

56381594