Canon imagePROGRAF W6400 드라이버 매뉴얼 - 페이지 17
{카테고리_이름} Canon imagePROGRAF W6400에 대한 드라이버 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imagePROGRAF W6400 24 페이지. Hdi driver guide
Canon imagePROGRAF W6400에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용자 설명서 (34 페이지), 브로셔 및 사양 (12 페이지)
페이지 인쇄
imagePROGRAF HDI Driver Guide
Graphics Settings
Use these settings to adjust the print mode and resolution.
1. Click the Vector Graphics below Graphics.
The Device and Document Settings sheet opens and switches to the display that
presents the graphics settings.
2. Select either Color or Monochrome.
3. Select a setting for Color Depth from the list.
Color Depth presents the following items for selection.
Mode
Color
Monochrome
4. Move the Res. slider to adjust the settings.
Res. presents the following items for selection.
Resolution
300 dpi
600 dpi
5. Click the OK button.
Custom Properties Settings
Use the Custom Properties settings to perform special settings for the HDI driver.
For more details, please refer to "Opening the Custom Properties Dialog Box" (p.3-5) and
"Custom Properties Dialog Box Functions" (p.3-5).
Setting Up a Print Job
Setting Details
16777216 (24-bit) colors
256 (8-bit) colors
2-Level grayscale
256-Level grayscale
16777216-Level grayscale
Setting Details
Print speed is faster due to the lower resolution setting. Printing
time is shorter and not as much computer memory is required.
Print speed is slower due to the higher resolution setting. Achieves
the best printing results, but printing time is longer and a large
amount of computer memory is required.
3-4