Canon imagePROGRAF W6400 드라이버 매뉴얼 - 페이지 23
{카테고리_이름} Canon imagePROGRAF W6400에 대한 드라이버 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imagePROGRAF W6400 24 페이지. Hdi driver guide
Canon imagePROGRAF W6400에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용자 설명서 (34 페이지), 브로셔 및 사양 (12 페이지)
페이지 인쇄
imagePROGRAF HDI Driver Guide
Cut Speed
Select a setting for the automatic cutting speed. Adjust this setting when auto cutting is not
cutting cleanly.
1. Select a setting from the Cut Speed list in the Media Detailed Settings dialog box.
Cut Speed presents the following items for selection.
Cut Speed
Printer Default
Standard
Fast
2. Click the OK button.
Keep Media Size
The margin selected with this checkbox with Roll Paper for Margin Safety, sets whether
the setting is done inside or outside the margin setting of the printer driver.
Keep Media Size
(a) On
(b) Off
Setting Up a Print Job
Setting Details
This item resets the value to the printer default settings.
Select this setting when you are not experiencing problems.
Select this setting if cutting with the "Standard" setting is not clean.
Setting Details
The margins settings are taken from inside the specified media.
The external size of the media is preserved and the printing area
becomes smaller so part of the image may be cut off at the bottom.
To select this setting, click the box to mark it with a checkmark.
The margins settings are taken from outside the specified media.
The print area is preserved and the margins and external
dimensions become larger. To select this setting, click the box to
remove the checkmark.
3-10