Dorema Contura 330 수동 지침 - 페이지 10

{카테고리_이름} Dorema Contura 330에 대한 수동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dorema Contura 330 18 페이지. Air awning

4. LEAKING AIR TUBES

As mentioned before in this instruction, first you need to make sure the

valves are screwed on tightly enough (finger tight!). In case the air tube

loses air slowly, unscrewing the valve and assembling it again is usually the

simplest solution for the leakage. In case one of the air tubes really gets

punctured it can be repaired in a simple way.

(1) Remove the ty-rap from the slider and open the zip.

(2) Remove the transparent air tube from the casing, fit the valve and inflate

the tube with a pump.

(3) Dip the tube under water and trace the leak.

(4) Use the enclosed repair patch in order to close the leak.

(5) Re-fit the air tube back into the casing, assemble the valve on the correct

position, close the zip and ALWAYS secure the slider of the zip with a ty-rap.

Your Dorema dealer can also supply all replacement parts. In case you do

not have a repair patch available, a TEAR-AID repair patch type B can also

be used. Type B is especially suitable for all PVC materials. Such a repair set

is also available at your local dealer.

It is recommended to take the Air awning down when it is completely dry.

Remove the roof bars and unscrew all the valves. The valves are secured

to the grey casing in order to prevent loss. Only screw the valves back on

when the awning is erected again. Fold or roll up the awning in such a way

that the valves are kept free as long as possible in order to allow the air to

escape.