Advance acoustic Pacesetter 170 사용 설명서 지침 - 페이지 8

{카테고리_이름} Advance acoustic Pacesetter 170에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Advance acoustic Pacesetter 170 9 페이지.
Advance acoustic Pacesetter 170에 대해서도 마찬가지입니다: 사용 설명서 지침 (15 페이지)

Advance acoustic Pacesetter 170 사용 설명서 지침

TROUBLESHOOTING

SWIRLS ON THE FLOOR AFTER SCRUBBING
Floor not clean.
Incorrect solution.
Area not properly swept - debris in pad or brush.
Improper pad or brush for the job.
Moving the machine too fast.
SWIRLS ON THE FLOOR AFTER DRY BUFFING
Moving the machine too fast.
Floor finish too soft.
Area not properly swept - debris in pad or brush.
Improper pad or brush for the job.
CIRCLES ON THE FLOOR
Machine standing still while the brush or pad is running.
FLOOR FINISH REMOVED
Improper pad... too aggressive.
Solution too strong.
MACHINE WOBBLES DURING OPERATION
Defective pad... one side is more dense than the other.
Machine left sitting on brush or pad for extended period of time causing bristles or pad to "take a set".
Pad not "seated" properly into pad holder bristles.
Warped block on brush or padholder - replace.
MACHINE DOES NOT RUN
Check plug for proper connection - on machine and at wall outlet.
Check building circuit breaker.
Check machine Circuit Breaker.
Call for service.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model Number
Motor
Transmission
Clutch Plate
Pad/Brush Speed
Pad/Brush Size
Wheels
Cord Length
Height w/Handle
Weight (w/cord)
Construction:
Handle Tube
Base
Pacesetter™ 170
Pacesetter™ 200
56107000
56107002
1.25 hp
Triple-Planetary
Triple-Planetary
NP-92
175 rpm
17" (43 cm)
20" (51 cm)
5" (13 cm)
5" (13 cm)
50' (15 m)
50' (15 m)
46" (117 cm)
46" (117 cm)
105 lbs (47.62 kg)
109 lbs (49.44 kg)
Tubular Steel
Tubular Steel
Die-Cast Aluminum
Die-Cast Aluminum
Pacesetter™ 170HD
56107001
1.25 hp
1.75 hp
Triple-Planetary
NP-92
NP-92
175 rpm
175 rpm
17" (43 cm)
5" (13 cm)
50' (15 m)
46" (117 cm)
105 lbs (47.62 kg)
Tubular Steel
Die-Cast Aluminum
FORM NO. 56041584 - Pacesetter 170, 200 / 170HD, 200HD - 7
Pacesetter™ 200HD
56107003
1.75 hp
Triple-Planetary
NP-92
175 rpm
20" (51 cm)
5" (13 cm)
50' (15 m)
46" (117 cm)
109 lbs (49.44 kg)
Tubular Steel
Die-Cast Aluminum