Asus 90MB0ZV0-M0EAY0 매뉴얼 - 페이지 12

{카테고리_이름} Asus 90MB0ZV0-M0EAY0에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus 90MB0ZV0-M0EAY0 27 페이지.

•

Serial port connector (10-1 pin COM2)

Connect the serial port module cable to this connector, then install the module to a

slot opening at the back of the system chassis.

Digital audio connector (4-1 pin SPDIF_OUT)

Connect the S/PDIF Out module cable to this connector,

then install the module to a slot opening at the back of the

system chassis.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

HD Audio standard. Connect one end of the front panel audio I/O module cable to

this connector.

•

PCI slots

The PCI slots support cards such as LAN card, SCSI card, USB card, and other

cards that comply with the PCI specifications.

PCI Express 2.0 x1 slots

This motherboard has two PCI Express 2.0 x1 slots that support PCI Express x1

network cards, SCSI cards, and other cards that comply with the PCI Express

specifications.

PCI Express 3.0/2.0 x16 slot

This motherboard has a PCI Express 3.0/2.0 x16 slot that supports PCI Express

3.0/2.0 x16 graphic cards complying with the PCI Express specifications.

1-4

Actual lighting and color will vary with LED strip.

If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip is connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

The LED strip will only light up when the system is operating.

The LED strip is purchased separately.

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard's high-definition audio capability.

If you want to connect a high-definition front panel audio module to this connector,

set the Front Panel Type item in the BIOS setup to [HD Audio]. By default, this

connector is set to [HD Audio].

PIN 1

SPDIF_OUT

Chapter 1: Product introduction