Asus 90MB13H0-M0EAYC 매뉴얼 - 페이지 20
{카테고리_이름} Asus 90MB13H0-M0EAYC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus 90MB13H0-M0EAYC 28 페이지.
페이지 인쇄
2.2
BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.
Entering BIOS at startup
To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test
(POST). If you do not press <Delete> or <F2>, POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
Press <Ctrl>+<Alt>+<Delete> simultaneously.
•
Press the reset button on the system chassis.
•
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
After doing either of the three options, press <Delete> key to enter BIOS.
•
•
•
•
BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.
2-2
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>.
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value.
The BIOS setup program does not support Bluetooth devices.
Chapter 2: BIOS information