Asus 90MB14Y0-M0EAY0 매뉴얼 - 페이지 10

{카테고리_이름} Asus 90MB14Y0-M0EAY0에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus 90MB14Y0-M0EAY0 30 페이지.

1.2.1 Layout contents

1. CPU socket

The motherboard comes with an AMD Socket AM4 designed for 3

Gen AMD Ryzen™ with Radeon™ Graphics Processors.

For more details, refer to Central Processing Unit (CPU).

2. DDR4 DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4

(Double Data Rate 4) memory modules.

For more details, refer to System memory.

3. Expansion slots

This motherboard supports one PCIe x16 graphics card and two PCIe 3.0 x1 network cards,

SCSI cards and other cards that comply with the PCI Express specification.

4. Fan headers

The Fan headers allow you to connect fans to cool the system.

5. Power connectors

These Power connectors allow you to connect your motherboard to a power supply. The

power supply plugs are designed to fit in only one orientation. Find the proper orientation and

push down firmly until the power supply plugs are fully inserted.

Ensure to connect the 8-pin power plug.

•

6. M.2 Slot (Key M)

The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.

The M.2 slot supports a PCIe 3.0 x4 mode and SATA mode M Key design and type

2242/2260/2280/22110 storage device.

7. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and

hard disk drives via a SATA cable.

1-2

For a fully configured system, we recommend that you use a power supply unit

(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a

minimum power of 350W.

We recommend that you use a PSU with a higher power output when configuring a

system with more power-consuming devices. The system may become unstable or

may not boot up if the power is inadequate.

If you are uncertain about the minimum power supply requirement for your system, we

recommend you to refer to online resources for Power Supply Wattage Calculator.

Gen AMD Ryzen™ and

FAN PWM

FAN IN

FAN PWR

GND

Chapter 1: Product Introduction