Asus A55M-E 사용자 설명서 - 페이지 25

{카테고리_이름} Asus A55M-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus A55M-E 47 페이지. A55m-e user's manual
Asus A55M-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~4)

These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard

disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can

create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.

A55M-E

A55M-E SATA 3.0Gb/s connectors

•

These connectors are set to AHCI mode by default. If you intend to create a Serial ATA

RAID set using these connectors, set the type of the SATA connectors in the BIOS to

[RAID]. See section 2.5.2 SATA Configuration for details.

•

You must install Windows

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

•

When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to

[AHCI]. See section 2.5.2 SATA Configuration for details.

ASUS A55M-E

SATA3G_1

SATA3G_2

SATA3G_3

SATA3G_4

XP Service Pack 3 or later version before using Serial

XP SP3 or later version.

1-17