DOREMIDI MPC-10 사용 설명서 - 페이지 5

{카테고리_이름} DOREMIDI MPC-10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOREMIDI MPC-10 8 페이지. Midi pedal converter
DOREMIDI MPC-10에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)

페이지 인쇄

 When MODE = Reset, depress the pedal to send the configured DATA2 value, release it to send

DATA2 = 0.

 When STATUS is PC or Pedal Type is Expression, MODE does not need to be configured.

Set: After configuring the parameters, click "Set" to set the pedal MIDI message.

Save File: Save the current pedal configuration content.

k. Open File: Load the configuration content of the pedal.

Pedal MIDI Data: MIDI message display box, after triggering the pedal, the pedal's MIDI

message will be displayed in the display box. STATUS, DATA1, DATA2 are displayed in

hexadecimal notation, and CHAN is displayed in decimal notation.

3. Example of pedal configuration

 Configure expression pedal

Configure the No. 2 pedal as an expression pedal, channel 1, and the CC controller is 21, as

shown in the figure: