Asus A7N8X-LA Explorer 2 사용자 설명서 - 페이지 10

{카테고리_이름} Asus A7N8X-LA Explorer 2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus A7N8X-LA Explorer 2 18 페이지. Microatx motherboard

Jumper

1. Clear RTC (3-pin CLRTC1)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.

You can clear the CMOS memory of date, time, and system setup parameters

by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include

system setup information, is powered by the onboard button cell battery.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 1-2 (Default) to pins 2-3 (Clear CMOS).

Keep the cap on pins 2-3 for about 5~10 seconds, then move the cap

back to pins 1-2.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup

to re-enter data.

Except when clearing the RTC RAM, never remove the jumper caps on default

position. Removing the cap will cause system boot failure!

A7N8X-LA/Explorer2

Clear RTC RAM

ASUS A7N8X-LA (Explorer 2) Motherboard

CLRTC1

1 2

2 3

Normal

Clear CMOS

(Default)