Asus A88XM-A 매뉴얼 - 페이지 21

{카테고리_이름} Asus A88XM-A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus A88XM-A 21 페이지.

Keyboard wake-up (3-pin KB_USBPWB)

This jumper allows you to enable or disable the keyboard wake-up feature. When you

set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key

on the keyboard. This feature requires an ATX power supply that can supply at least 1A

on the +5VSB lead, and a corresponding setting in the BIOS.

A88XM-A

A88XM-A Keyboard and USB device wake up

USB device wake-up (3-pin USBPWF)

Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,

DRAM refreshed, system running in low power mode) using the connected USB

devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,

DRAM in slow refresh, power supply in reduced power mode).

A88XM-A

A88XM-A USB device wake up

•

The USB device wake-up feature requires a power supply that can provide 500mA on

•

The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

ASUS A88XM-A

KB_USBPWB

+5VSB

+5V

(Default)

USBPWF

2 3

+5VSB

+5V

(Default)

1-13