Asus A88XM-PLUS 매뉴얼 - 페이지 11

{카테고리_이름} Asus A88XM-PLUS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus A88XM-PLUS 25 페이지.

Product introduction

1.1

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

•

Unplug the power cord from the wall socket before touching any component.

•

Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

•

Hold components by the edges to avoid touching the ICs on them.

•

Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

•

Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, or components.

Standby Power LED

The motherboard comes with a standby power LED that lights up to indicate that the system

is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down

the system and unplug the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard LED.

ASUS A88XM-PLUS

SB_PWR

Standby Power

Powered Off

1-1