Canon PowerShot SD430 DIGITAL ELPH WIRELESS 사용자 설명서 - 페이지 5
{카테고리_이름} Canon PowerShot SD430 DIGITAL ELPH WIRELESS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PowerShot SD430 DIGITAL ELPH WIRELESS 7 페이지. For camera-to-camera data transfer
Canon PowerShot SD430 DIGITAL ELPH WIRELESS에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 시스템 맵 (2 페이지), 사용자 설명서 (20 페이지), 설정 매뉴얼 (23 페이지)
페이지 인쇄
3
Select [Transfer] and press
If you have not selected the images for transfer order in advance,
specify the images with [Order] or [Mark all] and select [Transfer].
Transfer of images will begin. The wireless lamp and the
button will blink blue.
The transferring camera will display [Transferring] and the receiving
camera will display [Receiving]. When the transfer is complete, [Transfer completed] and
[File(s) received] will display.
If you wish to cancel the operation while transferring, press the FUNC./SET button while
[Transferring] is displayed on the screen.
If you have failed to receive, [File(s) not received] will be displayed. Press the FUNC./SET
button, and the screen will return to the previous screen.
It is not possible to transfer movies or sound memos.
Two cameras cannot transfer images at the same time (If one is transferring, the other
camera may only receive).
The camera receiving the images cannot cancel while receiving.
Received images will be stored at the end of all image files.
Ending the Wireless Connection
The wireless connection can be terminated by the following steps.
Ending from
(Wireless) Menu (See below).
Turn off the power or switch over to Shooting Mode
End with
1
(Wireless) Menu
2
Make sure the name of the camera is displayed as [Target Device],
then select [Disconnect] and press
The wireless connection will end and [Disconnected] will appear
on the target camera screen. Press the FUNC./SET button and
the Playback screen will appear.
(Wireless) Menu
[Connect/Disconnect]
.
.
5