Asus AT5IONT-I DELUXE 사용자 설명서 - 페이지 19

{카테고리_이름} Asus AT5IONT-I DELUXE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AT5IONT-I DELUXE 47 페이지. At5iont-i series user's manual
Asus AT5IONT-I DELUXE에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

1.7.2

Internal connectors

Serial ATA connectors (7-pin SATA1, SATA2)

These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk

drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the

Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster

than the standard parallel ATA (133 MB/s).

AT5IONT-I DELUXE SATA connectors

• Install the Windows

ATX power connector (24-pin EATXPWR) (for AT5IONT-I only)

This connector is for an ATX power supply. The plug from the power supply is designed

to fit this connector in only one orientation. Find the proper orientation and push down

firmly until the connector completely fits.

AT5IONT-I ATX power connector

• For a fully configured system, we recommend that you use a power supply unit (PSU)

• We recommend that you use a PSU with higher power output when configuring a

• If you are uncertain about the minimum power supply requirement for your system,

ASUS AT5IONT-I Series

XP Service Pack 2 or later versions before using Serial ATA.

that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum

power of 90 W.

system with more power-consuming devices. The system may become unstable or may

not boot up if the power is inadequate.

refer to the Recommended Power Supply Wattage Calculator at http://support.asus.

com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

SATA1

SATA2

1-10