Asus AT5NM10T-I NA 사용자 설명서 - 페이지 18

{카테고리_이름} Asus AT5NM10T-I NA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AT5NM10T-I NA 43 페이지. User manual
Asus AT5NM10T-I NA에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지)

페이지 인쇄

1.6

Jumpers

Clear RTC RAM (3-pin CLRTC)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can

clear the CMOS memory of date, time, and system setup parameters by erasing

the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in

CMOS, which include system setup information such as system passwords.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3

for about 5-10 seconds, then move the cap back to pins 1-2.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter

data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default

position. Removing the cap will cause system boot failure!

If the steps above do not help, remove the onboard battery and move the jumper again to

clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

1-9

E5179_AT5NM10-I.indb 9

Chapter 1: Product introduction

12/22/09 5:55:54 PM