Asus B250 MINING EXPERT 매뉴얼 - 페이지 10
{카테고리_이름} Asus B250 MINING EXPERT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus B250 MINING EXPERT 29 페이지.
USB 3.1 Gen 1 connector (20-1 pin U31G1_12)
Connect a USB 3.1 Gen 1 module to this connector for additional USB 3.1
Gen 1 front or rear panel ports. This connector complies with USB 3.1 Gen 1
specifications and provide faster data transfer speeds of up to 5 Gbps, faster
charging time for USB-chargeable devices, optimized power efficiency, and
backward compatibility with USB 2.0.
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the
two pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and
enter BIOS setup to re-enter data.
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
System panel connector (20-5 pin F_PANEL)
This connector supports several chassis-mounted functions.
Intel
B250 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
USB 2.0 connector (10-1 pin USB910)
Connect a USB module cable to this connector, then install the module to a slot
opening at the back of the system chassis. These USB connectors comply with
USB 2.0 specifications and supports up to 480Mbps connection speed.
Serial port connector (10-1 pin COM)
Connect the serial port module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
Digital audio connector (4-1 pin SPDIF_OUT)
Connect the S/PDIF Out module cable to this
connector, then install the module to a slot
opening at the back of the system chassis.
1-3
CLRTC
PIN 1
PIN 1
SPDIF_OUT
ASUS B250 MINING EXPERT