Asus B85B-V Plus 사용자 설명서 - 페이지 23

{카테고리_이름} Asus B85B-V Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus B85B-V Plus 46 페이지.

페이지 인쇄

ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation and

push down firmly until the connectors completely fit.

B85M-V PLUS

B85M-V PLUS ATX power connectors

•

We recommend that you use an ATX 12V Specification 2.0-compliant power supply

unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 4-pin

power plugs.

•

DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will

not boot up.

•

We recommend that you use a PSU with higher power output when configuring a

system with more power-consuming devices or when you intend to install additional

devices. The system may become unstable or may not boot up if the power is

inadequate.

•

If you are uncertain about the minimum power supply requirement for your system,

refer to the Recommended Power Supply Wattage Calculator at http://support.asus.

com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

Speaker connector (4-pin SPEAKER)

The 4-pin connector is for the chassis-mounted system warning speaker. The speaker

allows you to hear system beeps and warnings.

B85M-V PLUS

B85M-V PLUS Speaker Out connector

ASUS B85M-V PLUS

ATX12V

EATXPWR

PIN 1

+12V DC

GND

+3 Volts

+12V DC

+12 Volts

GND

+12 Volts

+5V Standby

Power OK

GND

+5 Volts

GND

+5 Volts

GND

+3 Volts

PIN 1

SPEAKER

PIN 1

GND

+5 Volts

-5 Volts

GND

PSON#

GND

-12 Volts

+3 Volts

1-15