DORIC DS2800 설치 매뉴얼 - 페이지 6

{카테고리_이름} DORIC DS2800에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DORIC DS2800 7 페이지.

INSTALLATION GUIDE

STEP 4: CYLINDER INSTALLATION

1. Rotate the cam of the ﬂoating

cylinder to align with the cutout

in lock body. (60 degrees)

2. Insert Cylinder until it is

centered with the lock body.

3. Install the supplied 43mm

screw to retain the cylinder.

4. Check the functionality of the

cylinder by rotating the key in

both directions to ensure free

movement of the cam.

DS2800 I

LIFT TO LOCK

MORTICE LOCKBODY

STEP 5: FURNITURE INSTALLATION

Insert the Square Spindle

through the Lock Body.

Place the Interior and

Exterior sides of the Furniture

on the Extrusion and ﬁx with

the supplied Fixing Screws.

Note:

Short Square Spindle to suit

Extrusions 30mm to 42mm.

Long Square Spindle to suit

Extrusions 42mm to 54mm.

Short Screws to suit

Extrusions 28mm to 38mm.

Long Screws to suit

Extrusions 38mm to 48mm.

National Sales Office:

38 Redfern Street

1300 132 389

Wetherill Park NSW 2164

Australia

www.doric.com.au

Ensure the Snib is

vertical in the

unlocked position.