daewon DIB-B850 사용자 설명서 - 페이지 14

{카테고리_이름} daewon DIB-B850에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. daewon DIB-B850 19 페이지.

페이지 인쇄

Expert mode

Automatic deodorize on/off

This feature can be set regardless seat sensor override.

Select Water temperature while Stop is selected and held to

initiate/cancel the automatic deodorize.

2 LEDs(green/red) of the energy saving blink with

Side arm

1 beep when it is activated and only the red LED

blinks with 2 beeps when it is deactivated.

The yellow LED of the energy saving blinks with

Remote

1 beep when it is activated, and the red LED of

the energy saving blinks with 2 beeps when it is

deactivated.

Automatic pulsation wash on/off

Deactivate the seat sensor override.

Select water pressure +/- simultaneously to enter automatic

pulsation wash setting mode.

Select and hold Rear wash for 3 seconds to initiate/cancel

automatic oscillation rear wash.

In the case of Child wash, Child pulsation wash is deactivated

first instead of being activated as it is set basically.

20sec front wash → 20sec front oscillating wash → 20sec

front oscillating/pulsating wash.

2 LEDs(green/red) of the energy saving blink with

Side arm

1 beep when it is activated and only the red LED

blinks with 2 beeps when it is deactivated.

The yellow LED of the energy saving blinks with

Remote

1 beep when it is activated, and the red LED of

the energy saving blinks with 2 beeps when it is

deactivated.

Automatic oscillation wash on/off

Deactivate the seat sensor override.

Select nozzle position ◀ ▶ simultaneously to enter automatic

oscillation wash setting mode.

Select and hold Rear wash for 3 seconds to initiate/cancel

automatic oscillation rear wash.

In the case of Child wash, Child oscillation wash is deactivated

first instead of being activated as it is set basically.

20sec front wash → 20sec front oscillating wash → 20sec

front oscillating/pulsating wash

2 LEDs(green/red) of the energy saving blink with

Side arm

1 beep when it is activated and only the red LED

blinks with 2 beeps when it is deactivated.

The yellow LED of the energy saving blinks with

Remote

1 beep when it is activated, and the red LED of

the energy saving blinks with 2 beeps when it is

deactivated.

Expert mode

기본기능

Water pressure / Nozzle position

/ Dry temperature change

Activate the seat sensor override

Side arm

Remote

Basically, the water pressure and nozzle position are

Green Red

Yellow

stored and are maintained from the previous user's

settings, but these can be ignored and automatically

be changed to the presets as soon as the seat is

unoccupied.

1 Beep

Adjust the nozzle position and water pressure and

Red

select and held Rear wash for 3 seconds.

Water pressure/Nozzle position of Front wash, Turbo

Wash and Child wash can be set by selecting and holding

2 Beeps

each button for 3 seconds.

Adjust the dryer temperature and select and held Dry

for 3 seconds.

simultaneously

Side arm

3 seconds

Remote

Side arm

Remote

Green

Red

Yellow

Silence mode on/off

1 Beep

Deactivate the seat sensor override.

Red

Select water pressure "-"while Stop is selected and

held to lower the volume of the beep sound.

The volume of the beep sound will be lowered after

2 Beeps

getting out of Expert mode.

simultaneously

Seat Sensor Bypsss

Regardless of the seat sensor override, the seat sensor

bypass can be set.

3 seconds

Select and hold Seat Temperature for a couple of

seconds to activate while Stop is selected. Repeat to

deactivate.

The yellow LED of the energy saving blinks with 1 beep

Side arm

Remote

when it is activated, and the red LED of the energy

Green

Red

Yellow

saving blinks with 2 beeps when it is deactivated.

During the seat sensor bypass activation, the auxiliary

touch panel does not work for safety.

1 Beep

Red

2 Beeps

2 LEDs(green/red) of the energy saving blink

with 1 beep when it is activated and only

the red LED blinks with 2 beeps when it is

deactivated.

The yellow LED of the energy saving blinks

with 1 beep when it is activated, and the red

LED of the energy saving blinks with 2 beeps

when it is deactivated.

※ Applicable to the remote models only

3 seconds

Side arm

Remote

Green Red

Yellow

1 Beep

Red

2 Beeps

Remote

Yellow

1 Beep

Red

2 Beeps