Asus CUW-AM 매뉴얼 - 페이지 7

{카테고리_이름} Asus CUW-AM에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus CUW-AM 21 페이지.

2. HARDWARE SETUP

2.5 System Memory (DIMM)

NOTE: No hardware or BIOS setup is required after adding or removing memory.

This motherboard uses only Dual Inline Memory Modules (DIMMs). Sockets are

available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Ac-

cess Memory (SDRAM) of 16, 32, 64, 128MB, or 256MB.

This chipset does not support ECC. However, ECC memory modules may still be

used, but the ECC function will not be available.

Install memory in any combination as follows:

Location

168-pin DIMM SDRAM

DIMM1

Single-Sided/Double-Sided

16, 32, 64, 128MB, or 256MB

(Rows 0&1)

DIMM2

Single-Sided/Double-Sided

16, 32, 64, 128MB, or 256MB

(Rows 2&3)

Total System Memory (Max 512MB)

• ASUS motherboards support SPD (Serial Presence Detect) DIMMs. This is the

memory of choice for best performance vs. stability.

• SDRAM chips are generally thinner with higher pin density than EDO (Extended

Data Output) chips.

• Single-sided DIMMs come in 16, 32, 64,128MB; double-sided come in 32, 64,

128, 256MB.

CUW-AM User's Manual

Total Memory