DORIC OTPG 8 사용자 설명서 - 페이지 11

{카테고리_이름} DORIC OTPG 8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DORIC OTPG 8 16 페이지. Optogenetics ttl pulse generator

2.2 Control and Settings

The Control and Settings box is used to manage the di erent parts of the software. It contains three tabs, the

Acquisition, Con guration, and View Tabs.

2.2.1 Acquisition Tab

The di erent buttons and elds of the Acquisition Tab are shown in Figure

below.

1. The Live button starts all the con gured channels without recording their signal.

2. The Record button starts all the con gured channels and record the signal for each of them at the de ned

Sampling Frequency. The recorded datas are saved in a .doric le (hdf5 based le) where the saved path and

lename can be de ned through the Saving Options button.

3. The Stampling Frequency eld de nes the frequency at which the recorded signal (using the Record button)

is sampled. Note: In Doric Studio version 6 and later, the record button also saves the con guration of the

OTPG (channel parameters, sampling frequency, ...) in the same .doric le. Use the Load con g button (see

section 2.2.2) to load this parameters.

Chapter 2. Operations Guide

Figure 2.11: Channels Con guration of the Input Mode Interface

Figure 2.12: Acquisition Tab

2.12

and their functions are explained