DORIC DS5010 설치 매뉴얼 - 페이지 4

{카테고리_이름} DORIC DS5010에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DORIC DS5010 4 페이지. Sliding door keeper

INSTALLATION GUIDE
DS5011
I SLIDING DOOR KEEPER
v1.1 - 11/08/2021
1. Placing Keeper
Install the Keeper base,
secured loosely in the INLINE
fixing holes using the mounting
screws provided.
Do not tighten the screws yet.
3. Fitting Cover
Install the front cover.
2. Vertical Adjustment
Adjust the Keeper base vertically until the correct
position is found in relation to the door lock.
The Keeper base offers adjustment up to 9mm
Now tighten the mounting screws.
4. Horizontal Adjustments
a) To increase horizontal
adjustments, loosen the top and
a)
bottom adjustment screws to the
desired amount (up to 5mm)
b) Loosen the centre adjustment
screw until the faceplate comes into
contact with the top and bottom
adjustment screws
b)
c) To decrease the horizontal
adjustment, tighten the centre
adjustment screw, and then tighten
the top and bottom adjustment
screws until firm
Head office:
38 Redfern St
Wetherill Park NSW 2164
Australia
4
Ph: 1300 132 389
Fax: 1300 652 292
sales@doric.com.au
www.doric.com.au