Advance acoustic EPSILON 7 시작하기 - 페이지 8

{카테고리_이름} Advance acoustic EPSILON 7에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Advance acoustic EPSILON 7 19 페이지.

Adjusting the speed system

Take the time to set up your speed system.

1) Make sure that the speed lines run freely

through the harness pulleys.

2) Pull the speedlines through the harness

and connect them to the glider risers using

the Brummel hooks a .

3) Adjust the length of the speed lines so

that pushing the first and second speed

bar steps reach SPI position 1 (30%) and

position 2 (80%) respectively.

You are now ready to fly.

If needed, you can also change the point at

which the pulley action changes from 3:1 to

2:1. When you start to push the speedbar

the pressure is light – easy when your legs

are bent. Then as you push more, the pres-

sure increases but the distance you need

to push reduces, which is useful when your

legs are more outstretched.