Akyga AK-EC-10 사용자 설명서 - 페이지 4

{카테고리_이름} Akyga AK-EC-10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akyga AK-EC-10 5 페이지.

AK-EC-10 - user manual

Type 1 connector

The Type 1 connector should be

connected to vehicle charging

socket. The plug is characterised

by five sleeves and protective

latch.

Type 2 connector

The Type 2 socket plug should

be connected to a power cable

with a connector of the same

type. The Type 2 socket outlet

has seven holes.

How to use

1. Prepare the vehicle for charging in accordance with the user manual.

2. Check that the adapter is not damaged.

3. Make sure the adapter has the right type of plug for your vehicle.

4. Check that the vehicle's socket and power plug are not damaged.

5. Pull the protective cap off the plug.

6. Connect the adapter to the power cord with a Type 2 plug.

7. Connect the Type 1 plug to the charging port of the vehicle.

8. After charging, disconnect the adapter from the power cord and car's charging port by

pressing the button that releases the clip and put the protective cap on.

Do not disconnect the plug while charging

p. 4