Canon 7215 - LV XGA LCD Projector 사양 - 페이지 23
{카테고리_이름} Canon 7215 - LV XGA LCD Projector에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 7215 - LV XGA LCD Projector 47 페이지. Mounting hanger for low ceilings
Canon 7215 - LV XGA LCD Projector에 대해서도 마찬가지입니다: 사양 (22 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable
Response
Unacceptable
8.7 Input Control COMMAND
8.7.1
CF_INPUT COMMAND
COMMAND
"CF_INPUT_%1" [CR]
"COMPUTER1"........ Select COMPUTER 1 input
%1
"COMPUTER2"........ COMPUTER 2 input
"VIDEO"........................ VIDEO input
Select Input.(Only valid when it is in the usual Power ON status.)
The Command works as the same as the remote controls's unit "INPUT"
button.
Details
Note1:)
Note2:)The selection of Input-1 is not COMPUTER-1 but Memory card/
Wireless/Network when Option box is installed to Input-1 (COMPUTER1).
Acceptable
Response
Unacceptable
8.7.2
CF_SOURCECOMMAND
COMMAND
"CF_SOURCE_%1" [CR]
%1
Select current input source.
(Only valid when it is in the usual Power ON status.)
When selected Input and specified %1 are not matched, the projector
Details
Note) When the option, MCI BOX is installed to Input-1 (COMPUTER1),
selection for source is invalid.
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] ----Input-VIDEO
If
trying
to
Input-2(COMPUTER)to MONITOR Out, the projector returns "101".
"000" [CR]
"%%%" [CR]
"DIGITAL"............Select DVI input
Input=1
"ANALOG"............ .Select ANALOG input 0
"HDCP"....................Select DVI HDCP input
"ANALOG"............Select RGB
Input=2
"YPBPR"................Select Component VIDEO input
"SCART"................ Select Scart input
"AUTO"..................Select VIDEO Auto MODE
Input=3
"VIDEO"................ Select Composite VIDEO input
"S-VIDEO"............ Select S-VIDEO input
returns"101" and does not execute the command.
"000" [CR]
"%%%" [CR]
select
Input-2
TERMINAL
error code "101"
when
setting
Page
23