Canon 7215 - LV XGA LCD Projector 사양 - 페이지 31
{카테고리_이름} Canon 7215 - LV XGA LCD Projector에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 7215 - LV XGA LCD Projector 47 페이지. Mounting hanger for low ceilings
Canon 7215 - LV XGA LCD Projector에 대해서도 마찬가지입니다: 사양 (22 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.12 CF_KEYDISCOMMAND
COMMAND
"CF_KEYDIS_%1" [CR]
N/A" --- RC and KEY are available
%1
"RC"
"KEY"
Set bar the use of RC/KEY. (Only valid when it is in the usual Power ON
Details
status.)
Acceptable
Response
Unacceptable
8.11.13 CF_TERMINALCOMMAND
COMMAND
"CF_TERMINAL_%1" [CR]
"COMPUTER"...... Set Input mode
%1
"MONITOR".......... Set Monitor Out Mode
Set TERMINAL(Only valid when it is in the usual Power ON status.)
Details
In this model, Terminal is COMPTUER2.
Acceptable
Response
Unacceptable
8.11.14 CF_STANDBYMODECOMMAND
COMMAND
"CF_STANDBYMODE_%1" [CR]
"ECO"................ Standby power requirement is smaller
%1
"NORMAL".... Normal Standby power requirement
Details
Set STANDBYMODE (Only valid when it is in the usual Power ON status.)
Acceptable
Response
Unacceptable
8.11.15 CF_POINTERCOMMAND
COMMAND
"CF_POINTER_%1_%2" [CR]
"SPOTLIGHT".......... Select Spotlight
"ARROW".................... Select Arrow
%1
"FINGER".................. Select Finger
"LASER".................... Select Laser mark
"MAX"............................ Maximum Spotlight
%2
"MID"............................ Medium Spotlight
"MIN"............................ Minimum Spotlight
Select POINTER image (Only valid when it is in the usual Power ON
status.)
Details
Note1)
When "ARROW"/"FINGER"/"LASER", specify "CF_POINTER_%1" [CR].
Note2) When "SPOTLIGHT", %2 cannot be omitted.
"000" [CR]
"Error Code" [CR]
...Bar the use of RC
...Bar the use of KEY
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
%2
is
available
when
"SPOTLIGHT"
is
specified
Page
only.
31