Canon 7215 - LV XGA LCD Projector (일본어) 조립 및 설치 매뉴얼 - 페이지 6
{카테고리_이름} Canon 7215 - LV XGA LCD Projector에 대한 (일본어) 조립 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 7215 - LV XGA LCD Projector 8 페이지. Mounting hanger for low ceilings
Canon 7215 - LV XGA LCD Projector에 대해서도 마찬가지입니다: 사양 (22 페이지), 사양 (47 페이지)
페이지 인쇄
取付ハンガー(LV-CL08) 03.8.26 7:40 PM ページ6
Fig. 1 Assembly
z
Screw (B)
Plus screw with round head
M4 x 40 (1 pc.) with spring washer
and flat washer
x
Adjuster
1. Pull out the adjuster from the
projector main body.
Measures to prevent the projector from falling
* Make sure to take measures to prevent the projector main body from falling as explained here.
c
Ceiling hanging
fitting
Main body mounting
fitting
2
Wire
(included in package)
2. Hang securely the drop
prevention wire included in the
package to the adjuster in the
main body (2 positions).
Screws (A)
Plus screw with round head M4 x 12 (3 pcs.)
with spring washer and flat washer
Main body mounting fitting (1 pc.)
Projector main body
Wire
clamp
3. Tighten securely the wire clamp
with the drop prevention wire,
and push down the adjuster in
the main body.
v
A Screws
(included in package)
4. Attach the drop prevention wire to
the main body mounting fitting
with two A screws (M4 x 12 mm)
included in the package. Attach
the drop prevention wire on the
opposite side in the same way.
Fix securely the main body
mounting fitting to the ceiling
hanging fitting with four A
screws (M4 x 12 mm)
included in the package.