Canon LV 5210 - SVGA LCD Projector 사양 - 페이지 9
{카테고리_이름} Canon LV 5210 - SVGA LCD Projector에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV 5210 - SVGA LCD Projector 47 페이지. Expand serial command functional specification
Canon LV 5210 - SVGA LCD Projector에 대해서도 마찬가지입니다: 사양 (22 페이지)
페이지 인쇄
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
5
Functional Execution Command Table
5.1 Image Command Table
Execute Command
CF_BRIGHT_%1 [CR]
CF_CONT_%1 [CR]
CF_COLOR_%1 [CR]
CF_TINT_%1 [CR]
CF_SHARP_%1 [CR]
CF_GAMMA_%1 [CR]
CF_WBAL-R_%1 [CR]
CF_WBAL-G_%1 [CR]
CF_WBAL-B_%1 [CR]
CF_COLTEMP_%1 [CR]
CF_PROGV_%1 [CR]
CF_IMAGE_%1 [CR]
CF_IMAGEADJ_%1 [CR]
5.2 PC Control Command Table
Execute Command
CF_FSYNC_%1 [CR]
CF_TDOTS_%1 [CR]
CF_CLAMP_%1 [CR]
CF_H-POS_%1 [CR]
CF_V-POS_%1 [CR]
CF_DDOTS_%1 [CR]
CF_DLINE_%1 [CR]
CF_PCSTORE_%1 [CR]
CF_PCMODEFREE_%1 [CR]
5.3 VIDEO Control Command Table
Execute Command
CF_AVDDOTS_%1 [CR]
CF_AVDLINE_%1 [CR]
CF_AVHPOS_%1 [CR]
CF_AVVPOS_%1 [CR]
CF_AVSERV_%1 [CR]
5.4 Input Control Command Table
Execute Command
CF_INPUT_%1 [CR]
CF_SOURCE_%1 [CR]
CF_INPUT_%1_%2 [CR]
CF_SYSTEM_%1 [CR]
Set Brightness value
Set Contrast value
Set Color value
Set Tint value
Set Sharpness value
Set-GAMMA value
Set White Balance Red value
Set White Balance Green value
Set White Balance Blue value
Set Color Temp. value
Set or Cancel for Progressive
Set Image MODE.
Reset and store for Image Adjustment.
Set Fine Sync value.
Set Total Dots value.
Set Clamp value.
Set Horizontal Position value.
Set Vertical Position value.
Set Display Dots value.
Set Display Line value.
Store e current PC Adj. Status to MODE 1, 2, 3, 4, or 5.
Reset MODE1, 2, 3, 4, and 5.
Set AV Horizontal Resolution Value
Set AV Vertical Resolution Value
Set AV Horizontal Position Value.
Set AV Vertical Position Value.
Reset AV Horizontal /Vertical Resolution that are set in
such as CF_AVDDOTS/CF_AVDLINE to default
setting.
Select Input.
Select Input Sauce.
Select Input and Source.
Select System.
Item
Item
Item
Item
Page
9