Canon LV-5200 소유자 매뉴얼 - 페이지 22

{카테고리_이름} Canon LV-5200에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5200 48 페이지. Canon lv-5200: user guide
Canon LV-5200에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)

페이지 인쇄

1. Connecting to Computer

COMPUTER INPUT

Choose either Computer 1 or Computer 2 by pressing the INPUT

button on the Top Control or on the Remote Control Unit.

If the projector cannot reproduce a proper image, select the correct

input source through the "MENU OPERATION" (see below).

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT button to move the red

frame pointer to the INPUT Menu icon.

Press the POINT DOWN button to move the red arrow pointer to

either Computer 1 or Computer 2 (Computer 1 is not displayed

when MONITOR OUT is selected in the SETTING Menu.), and

then press the SET button. The Source Select Menu will

appear.

Move the pointer to the correct input source and then press the

SET button.

When the input source is coming from a computer

RGB

through RGB IN 1 / OUT terminal, select RGB.

When the input source is coming from a DVD player

RGB (Scart)

through RGB IN 1 / OUT terminal, select RGB

(Scart).

When the digital signal is connected to DVI

RGB (Digital)

terminal, select RGB (Digital).

When the analog signal is connected to DVI

RGB (Analog)

terminal, select RGB (Analog).

NOTE

G Computer 1 can be selected when RGB IN 1 / OUT terminal is set

as COMPUTER 1 at the menu item "Terminal" in the SETTING

Menu. (Refer to page 36.)

(RGB Scart 21-Pin Video Input)

SELECTING THE INPUT SOURCE

DIRECT OPERATION

MENU OPERATION

INPUT button

✽

Computer 1

Computer 2

Video

✽

Computer 1 is not displayed when RGB IN 1/ OUT

terminal is used as MONITOR OUT.

INPUT MENU

INPUT Menu icon

Move the pointer either

Computer 1 or Computer

2 and press the SET

button.

Computer 1

Source Select Menu

Move the pointer to RGB

or RGB (Scart) and

press the SET button.