Canon LV-5210 사양 - 페이지 19
{카테고리_이름} Canon LV-5210에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5210 22 페이지. Mounting hanger for low ceilings
Canon LV-5210에 대해서도 마찬가지입니다: 사양 (47 페이지), 브로셔 및 사양 (2 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
Basic Serial Functional Specification for LV-5210/7215/7210
7
State Read Command
7.1 Format
7.1.1
A PC issues commands fin format as below.
"CＲ" COMMAND [CR]
Command: 1 character (See Status Read Command Table)
7.1.2
When a projector receives the appropriate command, it returns a character line as
the required data.
Required Data [CR]
Required Data: A character line (See Basic Status Read Command Table)
When receiving data cannot be decode, the projector returns, ""?" [CR].
7.2 Transfer Example
Get input mode for the projector by basic commands.
PC → Projector
Projector → PC
7.3 Status Read COMMAND
COMMAND
Detail
Response
【Details for Response】
7.3.1
"00" [CR]
Status: POWER ON
The image is displayed normally.
Command (current input mode command issue)
"C" "R"
"CR0" [CR]
Get the projector status
Acceptable
"%1" [CR]
"00" = POWER ON
"80" = STANDBY
"40" = Processing Count Down
"20" = Processing Cooling Down
"10" = Power Failure
"28" = Processing cooling down due to abnormal temperature
％1
"08" = Abnormal Temperature
"88" = normal after recovering abnormal temperature
"02" = cannot accept RS232C command
"24" = Processing Power Save・Cooling Down
"04" = Power Save
Unacceptable
"?" [CR]
"1" CR
Response
(
a few ms - 1s
(Shows
Computer 1 is selected)
"1"
CR
)
Page
19