Canon LV-5210 사양 - 페이지 16
{카테고리_이름} Canon LV-5210에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5210 47 페이지. Mounting hanger for low ceilings
Canon LV-5210에 대해서도 마찬가지입니다: 사양 (22 페이지), 브로셔 및 사양 (2 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4.4
CF_TINTCOMMAND
COMMAND
"CF_TINT_%1" [CR]
"000-063"------ Directly select for Tint setting value
%1
"UP"---------------- Current Setting value +1
"DN"---------------- Current Setting value-1
Set the user Control tint value.
The value set by this command will not be save to the projector. Therefore,
Details
when ALL OFF the projector, the value will return to the original setting.
(For STANDBYMODE, this value stays.)
NORMAL Power ON state.
Acceptable
Response
Unacceptable
8.4.5
CF_SHARPCOMMAND
COMMAND
"CF_SHARP_%1" [CR]
"000-015"------ Directly select for Gamma setting value
"UP"---------------- Current Sharpness setting value＋1
%1
"DN"---------------- Current_Sharpnes ssetting value -1
Set the user Control Sharpness value.
The value set by this Command will not be saved to the projector.
Details
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays.) Only valid when it is
the usual Power ON state.
Acceptable
Response
Unacceptable
8.4.6
CF_GAMMACOMMAND
COMMAND
"CF_GAMMA_%1" [CR]
"000-015"------ Directly select for-GAMMA setting value
%1
"UP"-----------------GAMMA setting value＋1
"DN"-----------------GAMMA setting value-1
Set the User Control-GAMMA Value
The value set by this Command will not be saved to the projector.
Details
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays) Only valid when it is in
the usual Power On state.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Only valid when it is in the
Page
16