Canon LV-5220 - Multimedia Projector SVGA 기능 사양 - 페이지 19
{카테고리_이름} Canon LV-5220 - Multimedia Projector SVGA에 대한 기능 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5220 - Multimedia Projector SVGA 20 페이지. Multimedia projectors
Canon LV-5220 - Multimedia Projector SVGA에 대해서도 마찬가지입니다: 기능 사양 (42 페이지), 사양 (6 페이지)
페이지 인쇄
Basic Serial Command Functional Specification
7.3.10. "24" [CR]
Status: Processing Cooling down by power save
Cooling down by the Power Management function in the Setting menu.
The control command is invalid.
This Cooling down by Power save moves to Power save after the cooling down time.
Status:
No signal
Response: "00"
7.3.11. "04" [CR]
Status: Power Save
The status is Power Save by the Power management function in setting menu.
7.4. Input Mode Read Command
Command
"CR1" [CR]
Detail
Get selected Input No.
Acceptable
Response
%1
Unacceptable
7.5. Lamp Time Read Command
Command
"CR3" [CR]
Detail
Get total lamp running hours.
Acceptable
Response
%1
Unacceptable
7.6. Setting Read Command
Command
"CR4" [CR]
Detail
Get setting status for screen such as Ceiling / Rear.
Acceptable
Response
%1
Unacceptable
Cooling Down by Power Save
"24"
After 5 minutes with no signal
"%1" [CR]
"1" = Computer 1
"2" = Computer 2
"3" = Video
"?" [CR]
"%1" [CR]
Show as 4 digits
Ex.: "0410" [CR] ---- 410 hours
"?" [CR]
"%1" [CR]
"11" = Normal Screen Setting
"10" = Top and Bottom reversal setting (Rear＆Ceiling On)
"01" = Left and Right reversal setting (Rear On)
"00" = Top / Bottom and Left / Right reversal setting (Ceiling On)
"?" [CR]
Page 18 of 19
Power Save
"04"
seconds
After about 90