Canon LV-7105 소유자 매뉴얼 - 페이지 33

{카테고리_이름} Canon LV-7105에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7105 40 페이지. Micro-portable multimedia projector
Canon LV-7105에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)

페이지 인쇄

Power management

This function turns the Projection Lamp off when the projector

detects signal interruption and the projector is not used for a certain

period in order to reduce power consumption and maintain the Lamp-

life. (This projector is shipped with this function ON.)

Power Management function operates to turn the Projection Lamp off

when the input signal is interrupted and the projector is not operated

over 5 minutes. This function operates as follows;

1. When the signal is interrupted, "No signal" and the counting

down (5 minutes) display appears.

2. When the Projection Lamp turned off, the READY indicator

turns off. The Cooling Fans operate for 90 seconds after the

Projection Lamp is turned off. (During this "Cooling Down"

period, the Lamp cannot be turned on.)

3. When the Lamp has cooled down, the READY indicator flashes

and the Lamp can be turned on again (Power Management

mode).

In this Power Management mode, the Projection Lamp is

automatically turned on when the input signal connected or the

projector is operated with any button on the Top Control or the

Remote Control.

Lamp age

The Lamp age function is designed to reset the lamp replacement

monitor timer. When replacing the lamp, reset the lamp replacement

monitor timer by using this function. (Refer to page 36.)

The language used in the ON-SCREEN MENU is selectable

from among English, German, French, Italian, Spanish and

Japanese.

Press the MENU button and the ON-SCREEN MENU will

appear.

Press POINT LEFT/RIGHT buttons to select

LANGUAGE and press the SELECT button. Another dialog box

LANGUAGE MENU will appear.

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the language that you want to set,

and then press the SELECT button.

SELECTING LANGUAGE

SETTING

Time left until Lamp off.

Move the Pointer to the

language that you want to

set, and then press the

SELECT button.