Canon LV-7225 - LCD Multimedia Projector XGA 기능 사양 - 페이지 20
{카테고리_이름} Canon LV-7225 - LCD Multimedia Projector XGA에 대한 기능 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7225 - LCD Multimedia Projector XGA 20 페이지. Multimedia projectors
Canon LV-7225 - LCD Multimedia Projector XGA에 대해서도 마찬가지입니다: 기능 사양 (42 페이지), 사양 (6 페이지)
페이지 인쇄
Basic Serial Command Functional Specification
7.7. Temp Read Command
Command
"CR6" [CR]
Get the temperature inside a Projector.
Detail
When some temperature sensors are installed in the Projector, it is possible to know
the temperature all at once.
Acceptable
%1
Response
%2
%3
Unacceptable
"%1_%2_%3" [CR]
%1 = Temperature, sensor 1
%2 = Temperature, sensor 2
%3 = Temperature, sensor 3
Temperature data form shows as 00.0.
When the temperature sinks to -, the first character is "-" like "-05.5"
[CR].
When cannot return the temperature data due to hardware
problems, the first character is "E" like"E00.0" [CR].
When the status is Standby or it is 10 seconds after Power On,
depend
on
Projectors;
temperature due to ballast lamp's residual heat. So, when the status
is Standby or it is 10 seconds after Power On, the process for the
abnormal temperature is not executed. The temperature data is
" ----" at the time.
When some temperature sensors are installed, the Projector sends
command continuously. "_31.5__35.2__33.4" [CR]
There is the first sensor's information, and after one space, there is
the second sensor's information.
"?" [CR]
temperature
may
approach
Page 19 of 19
critical