Canon LV-7225 - LCD Multimedia Projector XGA 기능 사양 - 페이지 18

{카테고리_이름} Canon LV-7225 - LCD Multimedia Projector XGA에 대한 기능 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7225 - LCD Multimedia Projector XGA 42 페이지. Multimedia projectors
Canon LV-7225 - LCD Multimedia Projector XGA에 대해서도 마찬가지입니다: 기능 사양 (20 페이지), 사양 (6 페이지)

페이지 인쇄
Canon LV-7225 - LCD Multimedia Projector XGA 기능 사양
Expand Serial Command Functional Specification

8.5.8. CF_PCSTORE Command

Command
"CF_PCSTORE"_%1" [CR]
"MODE1" ------------ Store current PC Adjust status to Mode 1
"MODE2" ------------ Store current PC Adjust status to Mode 2
%1
"MODE3" ------------ Store current PC Adjust status to Mode 3
"MODE4" ------------ Store current PC Adjust status to Mode 4
"MODE5" ------------ Store current PC Adjust status to Mode 5
Store current PC Adjust status (each parameter status such as Total dots) to
Mode 1 – 5.
Details
This command operates the same operation as storing to Mode1 – Mode5 in PC
Adjust Menu.
(Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable

8.5.9. CF_PCMODEFREE Command

Command
"CF_PCMODEFREE_%1" [CR]
"MODE1" -------- Mode 1 to Free
"MODE2" -------- Mode 2 to Free
%1
"MODE3" -------- Mode 3 to Free
"MODE4" -------- Mode 4 to Free
"MODE5" -------- Mode 5 to Free
Reset Mode 1, 2, 3, 4, and 5 to Free.
Details
This command works as the same when resetting Modes in PC adjust menu.
(Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable

8.6. Video Control Command

8.6.1. CF_AVDDOTS Command

Command
"CF_AVDDOTS_%1" [CR]
"UP" ------------ Current setting value +1
%1
"DN" ------------ Current setting value –1
Set AV Service Mode Horizontal Resolution value.
(Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On. When there e is no signal, the Projector returns "101" [CR].
Acceptable
Response
Unacceptable

8.6.2. CF_AVDLINE Command

Command
"CF_AVDLINE_%1" [CR]
"UP" ------------ Current setting value +1
%1
"DN" ------------ Current setting value –1
Set AV Service Mode Vertical Resolution value.
(Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On. When there e is no signal, the Projector returns "101" [CR].
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] ---- Input is Video
"000" [CR]
"101" [CR] ---- Input is Video
"000" [CR]
"101" [CR] ---- Input is PC
"000" [CR]
"101" [CR] ---- Input is PC
Page 17 of 41