Canon LV-7225 - LCD Multimedia Projector XGA 기능 사양 - 페이지 23
{카테고리_이름} Canon LV-7225 - LCD Multimedia Projector XGA에 대한 기능 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7225 - LCD Multimedia Projector XGA 42 페이지. Multimedia projectors
Canon LV-7225 - LCD Multimedia Projector XGA에 대해서도 마찬가지입니다: 기능 사양 (20 페이지), 사양 (6 페이지)
페이지 인쇄
Expand Serial Command Functional Specification
8.8.6. CF_KYSTNMODE Command
Command
"CF_KYSTNMODE_%1" [CR]
"STR" ----------- Set Keystone store Mode to Store
%1
"RST" ----------- Set Keystone store Mode to Reset
Details
Set Keystone store Mode. (Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable
8.9. Lamp Command
8.9.1. CF_LAMPH Command
Command
"CF_LAMPH_%1" [CR]
%1
"RST"
Reset total lamp running time. (Only valid when it is in the usual Power On
Details
status)
Acceptable
Response
Unacceptable
8.9.2. CF_LAMPMODE Command
Command
"CF_LAMPMODE_%1" [CR]
"NORMAL" ---------- Set Lamp Mode to Normal
%1
"ECO" ---------------- Set Lamp Mode to Silent
" A U T O " - - - - - - - - - - - - - Set Lamp Mode to Auto
Select Lamp Mode. (Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable
Response
Unacceptable
8.10. Sound Command
8.10.1. CF_VOLUME Command
Command
"CF_VOLUME_%1" [CR]
"000 – 063" -------------- Directly set Volume value
%1
"UP" ----------------------- Volume setting value +1
"DN" ----------------------- Volume setting value -1
Control Volume setting value. (Only valid when it is in the usual Power On
status)
The same operation as a Remote Control's turning up/down the volume. Also, the
Details
Command directly sets the volume value.
When setting volume value like Remote Control Unit operation, Sound Mute On
will be canceled. The setting value will be stored in a Projector.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 22 of 41