Canon LV-7275 사용자 설명서 - 페이지 14
{카테고리_이름} Canon LV-7275에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7275 25 페이지. Projector monitoring software v1 starter guide
Canon LV-7275에 대해서도 마찬가지입니다: 제품 설명서 (18 페이지), 시작 설명서 (6 페이지)
페이지 인쇄
CHAPTER 2 • Routine Operation
2
Enter a projector group name, and place a check mark beside necessary
projector parameter categories and enter its conditions for classification.
It will be a "Status group" if more than one condition is specified, and a "User group" if
none is specified.
Projector group
name
Product name
Projector name
Location
Status
Warning
Lamp
Lamp Time
(converted)
Filter
Air filter time
3
Click [OK] when you have completed entering the conditions.
Projector group is now added in the Projector group list.
C4
Category
Enter a name within 40 one-byte characters.
Enter a product name of the projector.
Enter any name of a projector in two-byte or one-byte characters.
Enter a location of the projector in two-byte or one-byte characters
Select a status of the projector from "Disconnected", "Power off",
or "Power on".
Select a warning status of the projector from "Yes" or "No".
Select a status of the lamp from "Normal", "Obtain a new lamp",
"Replace with the new lamp", "Obtain or replace with the new
lamp", or "Warning".
Select from "over" or "less than", and enter a number from 0 to
99999 for lamp usage time.
Select a status of the filter from "Normal", "Cleaning the air filter",
"Replacing the air filter" or "Cleaning or replacing the air filter".
Select from "over" or "less than" and enter a number from 0 to
99999 for air filter usage time.
Description