Canon LV-7545 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Canon LV-7545에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7545 44 페이지. Portable multimedia projector
Canon LV-7545에 대해서도 마찬가지입니다: 조립 및 설치 지침 (1 페이지), 브로셔 (2 페이지)
페이지 인쇄
PREPARATION
Picture tilt and projection angle can be adjusted by
rotating the ADJUSTABLE FEET. Projection angle can
be adjusted to 10.5 degrees.
Lift the front of the projector and pull the FEET LOCK
1
LATCHES on both sides of the projector.
Release the FEET LOCK LATCHES to lock the
2
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET
to fine tune the position and the tilt.
To shorten the ADJUSTABLE FEET, lift the front of the
3
projector and pull and undo the FEET LOCK LATCHES.
The position and the keystone distortion of the image can
be adjusted using the Menu Operation. (Refer to P 20
and 35.)
Use the Carry Handle when moving a Projector.
When moving a projector, replace the lens cover and
retract the feet to prevent damage to the lens and
cabinet.
When a projector is not in use for an extended period,
put it into the case (dust cover) supplied with a projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump a projector, otherwise damages or malfunctions may result.
When carrying a projector, use a suitable carrying case.
Do not transport a projector by using a courier or transport service in an unsuitable transport case. This
may cause damage to a projector. To transport a projector through a courier or transport service, consult
your dealer for best way.
10
ADJUSTABLE FEET
MOVING PROJECTOR
ADJUSTABLE FEET
FEET LOCK
LATCHES