Canon LV-7565 사양 - 페이지 24
{카테고리_이름} Canon LV-7565에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-7565 47 페이지. Multimedia projectors
Canon LV-7565에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 브로셔 (6 페이지), 사양 (6 페이지)
페이지 인쇄
Expand Serial Command Specification
8.6.5. CF_INPUT3 Command
Command
"CF_INPUT3_%1" [CR]
"VIDEO" ------------- Select Composite Video Input
%1
"S-VIDEO" ------- Select S-Video Input
"YPBPR" ------------ Select Y/Pb/Pr Input
Select Input-3 and specified source by %1 at the same time. (Only valid when it
Details
is in the usual Power On state)
Acceptable
Response
Unacceptable
8.6.6. CF_INPUT4 Command
Command
"CF_INPU_%1" [CR]
%1
"NETWORK" ---------- Select DVI Input
Select Input-4 and specified source by %1 at the same time. (Only valid when it
is in the usual Power On state)
Details
Note) When Network Manager is not installed, the Command is invalid and
Acceptable
Response
Unacceptable
8.6.7. CF_SYSTEM Command
Command
"CF_SYSTEM_%1" [CR]
Input is PC
%1
Input is
Select current selected Input system. (Only valid when it is in the usual Power
On state)
When Input does not meet the requirement for specified %1, the response will
be "101" and the Command does not execute.
Details
Note1) "NTSC" / "NTSC4.43" / "PAL" / "SECAM" / "PAL-M" / "PAL-N" is
Note2) "1080I" / "1035I" / "720p" / "575P" / "480P" / "575I" / "480I" is available
Acceptable
Response
Unacceptable
"000" [CR]
"%%%" [CR]
response is Error Code, "103".
"000" [CR]
"%%%" [CR]
"MODE1" ----------- Select Mode 1
"MODE2" ----------- Select Mode 2
"MODE3" ----------- Select Mode 3
"MODE4" ----------- Select Mode 4
"MODE5" ----------- Select Mode 5
"AUTO" ------------- Select system "Auto"
"NTSC" --------- Select NTSC
"NTSC443" ----- Select NTSC4.43
"PAL" ---------------- Select PAL
"SECAM" ------- Select SECAM
"PAL-M" -------- Select PAL-M
" P A L - N " - - - - - - - Select PAL-N
Video
"1080I" ---------- Select 1080i
"1035I" ---------- Select 1035i
" 7 2 0 P " - - - - - - - - - Select 720p
" 5 7 5 P " - - - - - - - - - Select 575p
" 4 8 0 P " - - - - - - - - - Select 480p
"575I" ----------- Select 575i
"480I" ----------- Select 480i
available only when Input is Video or S-Video.
only when Input is Y, Pb/Cb, Pr/Cr.
"000" [CR]
"Error Code" [CR]
Page 23 of 46