Canon LV-CL20 조립 및 설치 매뉴얼 - 페이지 13

{카테고리_이름} Canon LV-CL20에 대한 조립 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-CL20 20 페이지.

I Installation Precautions

Caution

When installing the projector, take appropriate measures using wire or other means to prevent falling due to an earthquake

or other vibration. Otherwise, the projector may fall, causing injury.

Always install to a level ceiling. Never install to an inclined ceiling.

The total weight of the ceiling attachment is 5.9 kg.

I Parts List

Ceiling Attachment ..... 1

Wench ..... 1

Screws A ...... 4

M4 x 10mm

(Phillips head machine screw

with integrated spring washer

and flat washer)

When hanging a projector from the ceiling using this attachment (hereinafter called

"the ceiling attachment"), the ceiling must have adequate strength to support the

projector, the projector attachment and the ceiling attachment. Before installation,

check the combined weight of the projector, projector attachment and ceiling

attachment as well as the strength of the ceiling based on that weight. If the strength

is insufficient, provide adequate reinforcement before proceeding. Otherwise, the

projector may fall and cause injury.

Drop-prevention wires ... 2

Screws B ...... 5

M4 x 18mm

(Phillips head machine screw

with integrated spring washer

and flat washer)

Projector attachment ...... 1

Fastening plates ...... 2

Screws C ...... 4

M6 x 14mm

(Phillips head hex bolt

with integrated spring washer

and flat washer)

Assembly and Installation

Manual (this manual)

Screws D ...... 4

M3 x 8mm

(Phillips head machine screw

with integrated spring washer)