Canon LV-S1 소유자 매뉴얼 - 페이지 26
{카테고리_이름} Canon LV-S1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-S1 44 페이지. Micro-portable multimedia projector
Canon LV-S1에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)
페이지 인쇄
COMPUTER INPUT
Display area
Selects area displayed with this projector. Select the resolution at
Display area dialog box.
Display area H
Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value to match
the resolution of image.
Display area V
Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value to match
the resolution of image.
Full screen
Press POINT LEFT/RIGHT button(s) to switch Full screen function to
"On" or "Off." Set "On" to resize the image with 4 x 3 aspect ratio to
fit the screen.
NOTE : Fine sync, Total dots, Display area (H/V) and Full screen
cannot be adjusted when "1035i (HDTV)" or "1080i (HDTV)"
is selected on PC SYSTEM Menu (P22).
3
Store
To store adjustment parameters, move a red frame pointer to
Store icon and then press SET button. Move a red arrow pointer
to any of Mode 1 to 5 that you want to store to and then press
SET button.
Mode free
To clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SET button. Move a
red arrow pointer to the Mode that you want to clear and then
press SET button.
Other icons operate as follows.
Reset
Reset all adjust parameters on adjustment dialog box to previous
figure.
Quit
Closes PC ADJUST MENU.
26
Press SET button at Display
area icon and Display area
dialog box appears.
To store adjustment data.
This Mode has parameters being stored.
Vacant Mode
Shows values of "Total dots,"
"Horizontal," "Vertical," "Display
area H," and "Display area V."
To clear adjustment data.
Display area
Close this dialog box.