Canon LV-X4 기술 사양 - 페이지 11

{카테고리_이름} Canon LV-X4에 대한 기술 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-X4 18 페이지. Multimedia projectors
Canon LV-X4에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 사양 (6 페이지)

페이지 인쇄
Canon LV-X4 기술 사양
SERIAL FUNCTIONAL SPECIFICATION

7.28. Brightness - Command

Command
"C21" [CR]
Detail
Brightness of user control -1
Acceptable
Response
Unacceptable
7.29. Computer 2_ RGB Command
Command
"C25" [CR]
Detail
Select Computer 2-RGB input
Acceptable
Response
Unacceptable

7.30. Image (Toggle) Command

Command
"C27" [CR]
Switch Image setting status
Detail
This command works the same as the remote control's "IMAGE" button.
Acceptable
Response
Unacceptable
7.31. ON Start Enable Command
Command
"C28" [CR]
Set to Power ON Start
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable
7.32. ON Start Disable Command
Command
"C29" [CR]
Clear to Power ON Start
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable

7.33. Power Management Ready Command

Command
"C2A" [CR]
Set Power Management to Ready mode.
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable

7.34. Power Management OFF Command

Command
"C2B" [CR]
Set Power Management to OFF mode.
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable

7.35. Power Management Shut down Command

Command
"C2E" [CR]
Set Power Management to Shut down mode.
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable
Item
Functional Execution Command
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page
11/18