Bolin Technology VCC-7HD30S-3SMN 빠른 시작 매뉴얼

{카테고리_이름} Bolin Technology VCC-7HD30S-3SMN에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bolin Technology VCC-7HD30S-3SMN 5 페이지.

Device: Bolin VCC-7HD30S-3SMN

Introduction

A large number of parameters can be controlled on the Bolin VCC-7HD30S-3SMN. Control is via VISCA

over IP (and not NDI). The Device Core is still in beta with few bugs to get sorted out.

Please notice currently the Bolin camera do not support block inquiry commands over IP, so not all current

settings on the camera will be transmitted back to our controllers. Examples

When our controller connects to the camera some settings will not be in sync with the actual state of the

camera. The shutter speed on our controller could reﬂect one setting, while the actual shutter speed on

the camera could be different until the shutter speed has in fact been set from our controller

If multiple SKAARHOJ controllers are connected to the same camera they will not be in sync, and

control might not be possible

If changes are made in the OSD these will not necessarily be reported back to the SKAARHOJ

controller

The implementation is done on Bolin VCC-7HD30S-3SMN Firmware version:

SKAARHOJ DEVICE CORES