Akyga AK-CH-08 사용자 설명서 - 페이지 3
{카테고리_이름} Akyga AK-CH-08에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akyga AK-CH-08 4 페이지.
페이지 인쇄
AK-CH-08 - user manual
Mains plug should be disconnect from power socket if the product is not in use for a long time.
ź
When disconnecting the power cord from the socket and from the device, do not pull on the
ź
cord, but only on the part of the cable plug provided for this purpose.
In case of any doubts regarding operation, safety or connection of the product, please contact
ź
the manufacturer or a qualified specialist for this purpose.
All maintenance, adjustment and repair work on the product may only be carried out by a
ź
qualified person in a specialist facility.
Removing the most common problems
Problem
A smartphone or other
device connected to an
cigarette lighter socket
via power adapter does
not work
A smartphone or other
device connected to an
electrical outlet via
power adapter does not
charge the battery or
displays a message
about the non-genuine
charger
Preparing the Power Supply for Use:
1.
Insert power adapter into the cigarette lighter socket.
2.
Connect the power adapter to the USB cable.
3.
Connect the USB cable with the smartphone or other device.
4.
Turn on the device.
Cause
No voltage
The power supply is
overloaded
Problem with the plug
There is a suspicion of a
product defect
The power supply does
not correspond to the
current parameters
Solution
Check if power supply is
ź
properly connected to the
cigarette lighter socket
Check the cigarette lighter
ź
fuses
Disconnect the power supply
ź
from the smartphone or other
device, check the correctness
of the current parameters
Check if power adapter is
ź
properly connected to the
cigarette lighter socket
Stop using and contact the
ź
seller
Disconnect the power supply
ź
from smartphone or other
device and check if current
parameters are correct
Contact with seller
ź
p. 3